HDMI/VGA Industrial Microscope Camera The Maximum Resolution of VGA Type C (USB)

• Warranty: 1 Year
• Type: Stereomicroscope
• Usage: Teaching, Research
• Transport Package: Carton
• Specification: 2KG
• Trademark: MSS
• Model NO.: MSS-SC100
• Origin: China
• HS Code: 8525892900
• Production Capacity: 5000pieces/Year

Product Description

HDMI/VGA Industrial Camera

Specifications

Ultra low price and high cost-effectiveness

The HD industrial camera has 30 built-in movable horizontal lines and 30 built-in movable vertical lines , and 1 to 30 of them
can be selected through the menu, and the color of the single line can be selected; The maximum resolution of VGA/HDMI/TYPE C (USB)
output is 1920*1080 60Hz. To ensure safety, please read the operating instructions carefully.
 

 

Interface and Button Functions

 

Installation

The industrial lens is installed in the CS interface of the camera, and the VGA/HDMI interface is connected

to the display input interface; Type C cable connected to the camera, USB port connected to 5V power adapter or computer USB,
after power-on, the indicator light turns from red to green, indicating that the camera has been working normally.

Product Parameters

1, 2 million 1/2.8, 1/2 (optional) inch CMOS, effective pixels 1920X1080, frame rate 60FPS, definition 900 lines.
2, Resolution:1920*1080(16:9), 1920*1080(16:10) , 1280*720(16:9) , 1024*768(4:3).
3, With CS/C lens mount, you can choose any CS/C mount lens.
4, Power supply: +5V allowable deviation of 10%, current not less than 0.5A. 

Menu Actions

Crosshair/Scale Bar Operation

Adjust the Image Effect

 

1, Open MENU-> White Balance-> Put a white paper under the lens and press the "+" key to trigger "Do a white balance calibration".
2, Adjust the brightness of the LED light source to achieve the desired imaging effect.
3, Open MENU->Images-> by +/- keys to adjust the value of the corresponding category.
4, Open MENU->Image-> "Auto Exposure", change the current value to "No" with the "+" key, and then adjust the brightness of the
LED light source.
5, If you need to restore factory parameters, open MENU->Settings-> "Factory Default Settings", confirm by the + key, at this
time the parameters are restored to factory state.
6, Under a low-light/high-magnification microscope, when the brightness is still dark by increasing the brightness through the
LED: open MENU-> Image-> "Increase Auto Exposure Brightness", and adjust the value by +/- keys to increase its overall brightness.

Common Problems and Solutions

1, The indicator light is green, the monitor has no image or indicates "out of frequency": disconnect the power, hold the "+"
key for a long time, then connect the power supply, when the indicator flashes, releases the "+" key.
2, The LCD display screen is incomplete and has black edges: press the AUTO button on the monitor
3, Dust on the lens or imaging element: wash with anhydrous alcohol (absolute ethanol) or wipe off with a spectacle cloth.
4, Forcibly restore factory parameters: disconnect the power supply, hold down the "POWER" key for a long time, and then connect
the power supply, when the indicator flashes,releases the POWER key.