| Customization: | Available |
|---|---|
| Warranty: | 1 Year |
| Usage: | Teaching, Research |
|
Still deciding? Get samples of US$ 149/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
MSS-700L
Specification
CCD slug,1/3" inch Large target size!
BNC/AV signal,Ultra low price!
high stability!long life!
NTSC/PAL system optional!
Automatic white balance!
1.Application Field
Industrial inspection, industrial measurement, medical image, image recognition, positioning, industrial monitoring, instrumentation,
machine vision and other industrial automation fields.
2.Camera Parameters
|
MODEL |
MSS-C-700L(color) |
|
Image Sensor Device |
1/3″SONY EXview HAD CCD II |
|
Effective Pixels |
PAL/NTSC:976×494 |
|
System of Signal |
PAL/NTSC |
|
Horizontal Resolution |
700 LINE |
|
Minimum illumination |
5LUX |
|
S/N Ratio |
> 60db |
|
Auto White Balance |
ON/OFF(Switchable) |
|
Automatic Gain Control |
ON:1/OFF:0(Switchable) |
|
Electronics Shutter Control |
OFF:1/60sec;ON:(Switchable)1/60-1/100,000/sec Automatic adjustment |
|
Backlight Compensation |
ON/OFF(Switchable) |
|
Lens mounting |
C |
|
Video output |
1.0Vp-p,75Ω |
|
Power Supply |
DC12V |
|
Operating Temperature |
-20-+50 |
|
Dimension(mm) |
43(W)×47(H)×66(D) |
|
Weight(g) |
About 135g |
Attention shall be paid to:
1. To maintain the voltage stability and continuity, keep the voltage at ± 10% 12V.DC The camera will be damaged if it is used within the range of.
2. This camera is for indoor use only. Therefore, please do not directly contact with water or put it under high temperature.
3. Please avoid heavy objects falling or strong vibration.
4. Please do not disassemble and modify its structure and parts. We are not responsible for any failure caused thereby, so please do not take such similar actions.
5. Please do not install the camera near high temperature sources and similar heaters, heating pipes or direct sunlight.
6. Please do not operate the camera directly with wet hands.
7. In case the camera does not work normally, please turn off the power first and then check all connectors. Whether the power cable and video cable are correctly connected.
8. Direct sunlight may also cause CCD damage.
){kind=link}